Skip to main content

Shaker ATC tutorial


Another post I found hiding in my drafts folder...  I'm ashamed to say this was written in January 2016 but I didn't hit the publish button!

I was asked by the wonderful Jessica Brogan, leader of the Card Deck Swap, to put together a tutorial for the ATC's I sent in a previous swap.  Here is what I put together...




To make these shaker ATC’s you will need some sort of background, a transparent material and some small ‘shaky’ pieces.  

I have used a watercolour background cut down to ATC size, and a playing card.  You could use patterned paper, mixed media artwork, magazine pages, book pages, fabric... the list is endless.   

I’ve used netting/tulle, vellum and a glassine bag for the shaker fronts.  You could also try scrapbook page protectors, thick plastic packaging and acetate.  

I’ve used sequins, beads and punched shapes as my shaky bits – anything small and relatively thin will work... try buttons, wood veneer shapes, die cut paper shapes. 

I’ve used a sewing machine to put my cards together.  You could also sew by hand, used thin double sided tape, washi tape, a FUSE tool, and if your shaky pieces aren’t too small you could even get away with stapling around the edge.


Here is a video and brief step by step of my method of creating.  (My way is not the only way, just a guide to get you started if you would like to try.)

  •  Play with watercolours on wet watercolour paper.  Add sea salt when wet.
  • Allow to dry completely and brush salt off.  TIP; moving the salt before everything is completely dry lessens the effect the salt has.
  • Stop and admire the effect the salt leaves!
  • Add another layer of colour using watercolours, ink and ink sprays.  Add water to get the colours to spread.  Again add sea salt when the colour is wet and allow to dry completely.
  • When completely dry brush the salt off and cut the background paper down to ATC size.
  • Cut your transparent material slightly bigger than the ATC and sew around three sides.  TIP; use a fairly long stitch.  Too short a stitch gives the effect of perforating the card!
  • Add your shaker pieces and sew up the fourth side capturing all the little pieces inside.
  • Knot the threads on the back.  TIP; you can seal your knots with a little blob of glue or clear nail varnish.
  • Trim your transparent material to size and add your words/image to the front of the card with strong double sided tape.  TIP; If you’ve used tulle/netting wet glue will seep through to the background and stop the shaky bits from shaking!
All the sequin mixes I used are from SpiegelMom Scraps.  If you want to stock up on sequins and get your hands on some glassine bags quote the code Laura15 at the checkout for 15% off your order.

This tutorial is just an idea to start you off, let your imagination run wild!  If you do make something inspired by this tag me @beadsbuttonsandbirds on instagram so I can check your work out. 

Comments

  1. Hi Laura, Nice ATCs.

    Hope you have a lovely day. Sue

    ReplyDelete

Post a Comment

Thank you for taking the time to comment.
I love to read your messages...

Popular posts from this blog

WOYWW 159

Hello, Happy Whats On Your Workdesk Wednesday !  As promised a picture of last Wednesdays 'work' finished off.  Post and more photos here . This week I'm showing off the beaded ATC I made... Tricky to photograph so your getting one with flash and one without... It was all parcelled up and sent off to Queen of Desks Julia .  Here is a basic of how it was made... (lots of waffle about wefts and warps!) I use a flexible beading needle.  It is mainly 'eye' so it is very easy to thread. And delica beads which are more regular and accurate than the better known seed bead.  They are slightly more rectangular than round so they line up better. Thread your needle with the weft thread.  (The cross ways thread that weaves back and forth.)  Pick up the beads... Pass the needlefull of beads underneath the warp (tight length ways) threads on the loom... ...and push each bead up in the corresponding g

Hoppity!

Hoppity hoppity!!  :) Hopeful you have arrived here from Fleur 's blog as part of the Crafty Ribbons Easter Hop .  If not and you've found yourself here wondering what on earth I'm on about (and let’s face it J you wouldn’t be the first!!) check out the Inspirations site for all the juicy details! My project for the hop is         Easter bunting!  I cut three templates first - a triangle pennant, a bird and a heart.        Then I cut the pennant shapes from fibre ribbon, threaded them on to some 3mm satin and evenly spaced them.  I embellished each flag with some beads...       I backed the birds and heart on some thin white card and glued them to the centre of the pennants.   My supplies list: yellow fibre , pink fibre , lime fibre , 3mm satin , button box , white card, glue, beads, needle and thread.   At each stop on the hop there'll be a word to collect and a candy draw. I've got these

WOYWW & Card Deck Swap

First up is my desk ... Hmm.  Perhaps the less said the better!  I really should have a sort out but I fancy desking instead! Next I want to share my card deck swaps (deskers don't have to stay for this bit but I reckon you'd enjoy joining in with us, which is why I'm including it in this post) You can read about the swap here on Jessica's blog and sign up here .  Basically, we take a deck of cards, add paint and/or paper, then add a positive sentiment to each card.  Post them to Jessica who shuffles them and sends back 52 different cards from different artists (yes, you are an artist!) from all over the world. These few are ones I have picked out to display first.  I'll swap them round after a few weeks.  Do you like my domino pegs?  :) Thanks for stopping by.  I hope you'll at least consider joining us for the card swap - it's like a super sized ATC swap, and all WOYWW er's know they are fun! See you at your desk x